What You Must Know Regarding the Log Home Builder Kits
The first decision which you have to make when you think about using the log home builder kits for building that log home is the method of its construction. You can have the butt-and-pass method or the saddle notch method. Each style would actually refer to the manner in which the home is jointed at its corners.
You have to know that the saddle notch method would require the builders to cut that notch in the log that fits a perpendicular log that is going to be placed on top of this. The logs are being continuously stacked in this fashion for building a wall and the weight of the logs would make them appear lightly and make such secure corners. There are some builders which drive a bolt or stake through the logs in order to add security.
Through the butt-and-pass method, such perpendicular log is butted against the existing log when the stacking of the log is started. At the second level of stacking, the log is going to pass over the first perpendicular log. With the third level, the log would butt up against the perpendicular log. This stacking would continue until the wall is finished.
Learning The Secrets About Houses
You must understand that the butt-and-pass method utilized in the log home kits create such spacing between the logs that have to be filled with chinking as well as insulation, that is a method similar to caulking such log home. The logs are secured with stakes and bolts driven down from one log to the next.
9 Lessons Learned: Builders
Know that the saddle notch method is naturally more expensive for the homebuyers and the builders. One of the reasons for such is because of such amount of precision to align the logs properly. It would take careful measuring to have the logs cut with the right inch specifications so that the perpendicular log may fit into the groove and then create that tight corner.
Even if a few companies out there are do claim to use the butt-and-pass method for the log home kits, there are also critics that have contended this type of method isn’t possible through the use of the kit. The kits are often manufactured somewhere else and they are shipped for assembly on the property. Some builders do claim that the butt-and-pass method is strong and this cannot be shipped in parts and also be reassembled.
One of the challenges which a lot of homeowners who purchase the log home builder kits face is that after the assembly would start is settling. This is actually a kind of natural process that forces some parts of the home to fall out its alignment after a year or after the logs have completely dried up.